- General Use Steel Seals

- General Use Steel Seals

Five standard seal types

Snap-on seals (General Use) - Placed over the overlapping strap ends either during or after tensioning the strapping. Eliminates pre-threading. Speeds the strapping operation.

Thread-on seals (General Use) - Must be threaded over the overlapping strap ends before the tensioning tool is applied. Generally used on bales, bundles, and the larger strap sizes.

Open-flange seals (General Use) - Heavy duty version of the snap-on. Requires no pre-threading

Push type seals (General Use) - Used where strap is tensioned by butting the nose of the tensioner against the seal. Overlapping flanges withstand the higher stress.

Nestack seals (General Use & Power Strap Machine PSM Use) - Held together by interlocking nibs. This Signode development permits loading partial stacks into magazines of seal feed combination tools and power strapping machines. USE NESTACK ONLY FOR POWER STRAPPING MACHINE SEALS APPLICATIONS

*All seals designated as “DG” have an aluminum oxide grit glued to the inner face. Grit seals are used in crimp joint systems in conjunction with lubricated strapping to provide a source of friction.

Pricing for all seals shown is for 1-3 cases purchased.  For purchase of 4 or more cases please call for special discounted pricing.


View as Grid List

Items 1-9 of 27

Page
per page
Set Descending Direction
  1. 38 AL, 3/8" (9.5mm) Nestack Double Notch
    38 AL, 3/8" (9.5mm) Nestack Double Notch
    Call for Price
  2. 38 C, 3/8" (9.5mm) Snap-On Double Notch
    38 C, 3/8" (9.5mm) Snap-On Double Notch
    Call for Price
  3. 38 SPC, 3/8" (9.5mm) Push Single Notch
    38 SPC, 3/8" (9.5mm) Push Single Notch
    Call for Price
  4. 12 AL, 1/2" (12.7mm) Nestack Double Notch
    12 AL, 1/2" (12.7mm) Nestack Double Notch
    Call for Price
  5. 12 AMP, 1/2" (12.7mm) Nestack Double Notch
    12 AMP, 1/2" (12.7mm) Nestack Double Notch
    Call for Price
  6. 12 C, 1/2" (12.7mm) Snap-On Double Notch
    12 C, 1/2" (12.7mm) Snap-On Double Notch
    Call for Price
  7. 12 SPC, 1/2" (12.7mm) Push Single Reverse Notch
    12 SPC, 1/2" (12.7mm) Push Single Reverse Notch
    Call for Price
  8. 58/34 AMP, 5/8" (15.9mm) Nestack Double Notch
    58/34 AMP, 5/8" (15.9mm) Nestack Double Notch
    Call for Price
  9. 58 C, 5/8" (15.9mm) Snap-On Double Notch
    58 C, 5/8" (15.9mm) Snap-On Double Notch
    Call for Price
View as Grid List

Items 1-9 of 27

Page
per page
Set Descending Direction
Copyright © 2004 - 2018 B2B Industrial Packaging LLC. All rights reserved.